QUESTIONS LISTS
FOR EX-CHU EX-PROOF SUSPENSION CRANE
Dear customers:
CLESCRANE design reference standards are all from CMAA 74-2020
Your information:
Pls select type (
red means we can't do it):
Key question 2:
How many times are expected to be lifted during the busiest hour?
*
CLESCRANE Design Crane Classifications:
CLASS C (MODERATE SERVICE)
This service covers cranes which may be used in machine shops or paper mill machine rooms, etc., where service requirements are moderate. In this type
of service the crane will handle loads which average 50 percent of the rated capacity with 5 to 10 lifts per hour, averaging 15 feet, not over 50 percent of the lifts at
rated capacity.
CLASS D (HEAVY SERVICE)
This service covers cranes which may be used in heavy machine shops, foundries, fabricating plants, steel warehouses, container yards, lumber mills,
etc., and standard duty bucket and magnet operations where heavy duty production is required. In this type of service, loads approaching 50 percent of the rated capacity
will be handled constantly during the working period. High speeds are desirable for this type of service with 10 to 20 lifts per hour averaging 15 feet, not over 65 percent
of the lifts at rated capacity.
Lift height: (height>18m can be customized)
*
One side travel length
m*
Functions of crane:
CLESCRANE Standards:
1. Anti-ex Pendant & cables
2.
Monitoring unit
3.
Lifting motor and travel motor brand is GBCRANES
4. Anti-ex three level lifting limit
5. Moter IP55
6.
Brake IP65
7.
II area gas A\B\C type,Temperature T1~T4
8.
Anti-ex crane travel limit
9.
End stop for long travel
10.
Copper & Stainless steel hook
11. Stainless steel wheel
12. Anti-ex sound light alarm
Pls understand that additional functions may increase the cost.
Thank you very much for your patience for this list, please send the list to
inquiry@clescrane.com , we will
get back to you as quickly as possible!
