QUESTIONS LISTS
FOR CH WIRE ROPE ELECTRIC HOIST
(FOR SINGLE GIRDER CRANE )
Dear customers:
CLESCRANE design reference standards are all from CMAA 74-2020
Your information:
Lift height: (height>18m can be customized)
*
Key question 3:
Adapter beam width for hoist W (Special reminder: 550mm≤W<690mm can be customized)
*
Key question 4:
How many times are expected to be lifted during the busiest hour?
*
CLESCRANE Design Crane Classifications:
CLASS C (MODERATE SERVICE)
This service covers cranes which may be used in machine shops or paper mill machine rooms, etc., where service requirements are moderate. In this
type of service the crane will handle loads which average 50 percent of the rated capacity with 5 to 10 lifts per hour, averaging 15 feet, not over 50 percent of the
lifts at rated capacity.
CLASS D (HEAVY SERVICE)
This service covers cranes which may be used in heavy machine shops, foundries, fabricating plants, steel warehouses, container yards, lumber mills,
etc., and standard duty bucket and magnet operations where heavy duty production is required. In this type of service, loads approaching 50 percent of the rated capacity
will be handled constantly during the working period. High speeds are desirable for this type of service with 10 to 20 lifts per hour averaging 15 feet, not over 65
percent of the lifts at rated capacity.
Functions of hoist:
CLESCRANE Standards:
1. Pendant & cables
2. Monitoring unit
3. Lifting motor and travel motor brand is GBCRANES
Weighing hook blocks & Display:
When the lifting capacity ≤ 20t, it's recommended to use the weighing hook blocks;
When the lifting capacity>20t, it's recommended to use the display
Pls understand that additional functions may increase the cost.
Thank you very much for your patience for this list, please send the list to
inquiry@clescrane.com, we will
get back to you as quickly as possible!
