The tasks of the waste handling cranes are: mixing, stacking, handling and stirring of the waste materials in the incinerator. They ensured the uniform of waste composition and calorific value, stable combustion in the incinerator. At the same time, it can clean up the garbage which near the discharge door timely to ensure the normal using of discharges gate area.
Automatic waste handling cranes are dedicated cranes using in waste incineration power plant. The first intelligent identification technology in this industry based on customers’ needs; selecting the appropriate automatic level of crane with manual, semi-automatic, fully automatic three control mode for free switch. The automatic mode crane can intelligently recognize and distinguish the height of the material picking point, intelligently make the waste flat, control process sequence, automatically control hook operation of crane, complete the feeding of the incinerator and the fetching, stacking and mixing process of the living waste yard. The crane must always operate continuously at maximum efficiency, which is critical to the overall workflow. Normally, there are two waste handling cranes above the waste pit, with one serving as a backup. The primary crane undertakes the main operating functions while the other is being serviced.
The most important point is we can achieve a variety of control processes with the development of our monitoring services. It is controlled not only by the operator console, but also by remote control.